Split Electroagnetic Flow Meter
Split Type Electromagnetic Flow Meter have flexible mounting method, the display part can be mounted on the wall by the cable from the measure part.it is suitable for the pipeline underground or location which is not convenient to read the data locally .It is widely used in the fields of petroleum, chemical industry, metallurgy, light spinning, paper making, environmental protection, food and other industrial sectors.
Measure Medium |
Water,Sewage,Acid,Alkali,Slurry,Milk |
|||
Nominal diameter |
15-500mm |
|||
Degree of accuracy |
±0.5%R |
|||
Medium conductivity |
≥5uS/cm,Actual conductivity≥30uS/cm |
|||
Nominal pressure |
1.0MPa |
1.6MPa |
2.5MPa |
4.0MPa |
DN15-DN500 |
DN15-DN500 |
DN15-DN500 |
DN15-DN50 |
|
Highest medium temperature |
Compact type |
+80℃ |
||
Remote type |
CR chloroprene rubber liner (CR) |
+80℃ |
||
Polytetrafluoroethylene lining(F4) |
+120℃ |
|||
Politef lining(F46) |
+120℃ |
|||
Teflon(PFA) |
+180℃ |
|||
Fluorosilicone rubber(FVMQ) |
+250℃ |
|||
Output signal |
4-20mA;Pulse/Frequency 2kHz(Default),5KHz(Max) |
|||
Supply voltage |
110/220VAC(100-240VAC),50Hz/60Hz;24VDC ±10% |
|||
Communication |
RS-485,Support standard Modbus-RTU protocol;GPRS |
|||
Electrode material |
Stainless steel 316L,Hastelloy C,Hastelloy B,titanium, tantalum, platinum |
|||
Level of protection |
Remote type |
IP68,IP65 |
||
Compact type |
IP65 |
PHILPS military level CPU,
Independent AD chip,
EMC standard anti-jamming.
Basic function
The excitation current can be selected as 125mA, 187.5mAand 250mA. the excitation current can be selected as 125mA, 187.5mA and 250mA, respectively.
The air traffic control measurement function without additional electrode, continuous measurement, fixed value alarm;
http://www.en-acemeter.com/